Car Infotainment System in Pune
Your car's factory infotainment system was designed around a budget, not around what you actually want to do while driving. At Carbon and Chrome in Viman Nagar, we supply and install Android infotainment screens with Apple CarPlay, Android Auto, GPS navigation, Bluetooth, and reverse camera support. Every screen is fitted by our in-house team with full integration checks for your specific car model.
The difference between a good infotainment installation and a bad one is not the screen. It is the preparation before installation and the integration work after.
A screen that fits the dashboard cutout but loses your steering wheel audio controls is a bad installation. A screen that shows a reverse camera image but does not match the factory camera's angle calibration is a bad installation. A screen that triggers a warning light because it was not wired into the CAN bus correctly is a bad installation.
We check compatibility for your specific car model before recommending a screen, handle the electrical integration correctly during installation, and test every function before the car leaves our studio. Steering wheel controls, reverse camera, factory parking sensors, climate display, and any other factory-integrated function is verified working after installation.
Explore Our Car Infotainment Systems in Pune
We supply Android infotainment screens for a wide range of popular car models sold in India. Screen sizes range from 7 inch to 12.3 inch depending on the car's dashboard cutout and the customer's preference. Every screen we install supports:
-
Apple CarPlay and Android Auto
-
GPS navigation with offline maps
-
Bluetooth audio and hands-free calling
-
Reverse camera integration
-
USB and AUX connectivity
-
Voice control support
-
OBD2 diagnostics display (on supported screens)
For cars where a direct-fit screen is available, we source the model-specific unit that uses the factory dashboard cutout without modification. For cars where a universal screen is the only option, we fabricate or source the correct fascia trim to ensure a clean, factory-finish result.
Key Car Infotainment Features:
Our advanced car infotainment technology brings together the latest in-car entertainment solutions with practical functionality. Each GPS-enabled infotainment system is designed to enhance your driving experience while maintaining safety and convenience.
Touchscreen Display with Intuitive Interface
Modern Android infotainment screens run on fast processors with enough RAM to handle navigation, music streaming, and calls simultaneously without lag. Screen resolution and touch response are significantly better than factory systems in most mid-segment cars. We select screens with reliable processors and adequate storage, not the cheapest option with the right brand name on the box.
Bluetooth and Wireless Connectivity
Every screen we install supports Bluetooth for audio streaming and hands-free calling. Wireless CarPlay and Android Auto are available on premium screen models for customers who do not want to connect a cable every time they get in the car. We verify Bluetooth pairing stability and audio quality before handover.
Apple CarPlay and Android Auto Support
CarPlay and Android Auto are the most requested features in infotainment upgrades. They give you Maps, Waze, Spotify, WhatsApp, and every other app you use daily on a large screen with voice control, without taking your eyes off the road. We install both wired and wireless CarPlay/Android Auto depending on the screen model and your preference.
GPS Navigation and Voice Control
Built-in GPS with offline maps means navigation works without a data connection. Important for trips outside Pune's metro area where mobile data can be unreliable. Voice control lets you set destinations, make calls, and control music without touching the screen while driving.
Reverse Camera Integration
Every infotainment installation at Carbon and Chrome includes reverse camera integration. The screen automatically switches to the camera feed when reverse gear is engaged. We calibrate the camera angle and grid lines to match your car's actual turning radius and parking geometry.
High Quality Audio and Video Playback
Better infotainment screens have dedicated audio processors that improve sound quality through the car's existing speakers even before any speaker upgrades are made. Video playback for rear seat entertainment, USB media playback, and streaming app support are standard on the screens we install.
Perfect Dashboard Fit
A screen that does not fit the dashboard properly looks worse than the factory unit it replaced. We source model-specific screens and fascia kits wherever available. Where a custom fit is required, we fabricate the surround at our studio. The finished installation should look like it was designed for the car, not adapted to fit it.
Car Infotainment Brands We Offer
We supply infotainment screens from Nakamichi, DHC, Sony, Alpine, Blaupunkt, Pioneer, Hyper Sonic, Eonon, and other brands with proven performance in the Indian market. Screen recommendation depends on your car model, the features you need, and your budget. We do not push a single brand regardless of fit. We recommend what actually works best for your specific car and requirements.
Why Pune Car Owners Get Their Infotainment Done at Carbon and Chrome
01
Compatibility Checked Before You Buy
We check whether a specific screen is compatible with your car's model and variant before you spend money on it. Dashboard cutout dimensions, wiring harness connector type, steering wheel control interface requirements, and factory feature retention are all checked upfront. This prevents the most common infotainment upgrade mistake: buying a screen that does not fit or loses factory functions.
02
Steering Wheel Controls Retained
Most modern cars route audio controls through the steering wheel. Fitting an aftermarket screen without the correct interface module disconnects these controls permanently. We source and install the correct CAN bus or resistor-type interface for your car's steering wheel control system so everything continues working after installation.
03
Factory Camera and Sensor Integration
Cars with factory reverse cameras, front cameras, and parking sensors need these integrated correctly into the new screen. We handle this integration as standard on every installation. The camera image, grid lines, and sensor beep behaviour all function correctly after our installations.
04
Clean Installation Inside the Dashboard
Every screen installation at Carbon and Chrome is wired cleanly behind the dashboard. No wiring hanging below the fascia, no connections made with tape, no cables visible from the driver's seat. We remove the dashboard properly, route cables through existing channels, and reassemble to factory standard.
05
Shadab Handles Every Infotainment Installation
Shadab leads our accessories team and has installed infotainment systems across hundreds of car models at our studio. His experience with model-specific fitment challenges, CAN bus integration, and post-installation tuning is what makes the difference between a system that works and one that causes problems six months later.
06
Post-Installation Testing Before Handover
We test every function before the car leaves. CarPlay connection, Android Auto, Bluetooth pairing, reverse camera, steering wheel controls, GPS lock, USB playback, and factory feature retention. If anything is not working correctly, we resolve it before you collect the car.
Car Infotainment Systems Near You — Serving Customers Across Pune
Our studio is in Ramwadi, Viman Nagar. Customers come to us for infotainment upgrades from across Pune:
-
Kharadi (4 km)
-
Kalyani Nagar (3 km)
-
Koregaon Park (5 km)
-
Yerwada (2 km)
-
Wagholi (7 km)
-
Hadapsar (8 km)
-
Magarpatta (7 km)
-
Lohegaon (4 km)
-
Vishrantwadi (6 km)
-
Pune Camp (9 km)
-
Baner (19 km)
-
Bavdhan (23 km)
Pickup and drop available on request for all areas. Call 8484092049 to arrange.
Frequently Asked Questions
What is an Android car infotainment system?
An Android car infotainment system is a touchscreen head unit that runs the Android operating system and replaces your car's factory radio or display. It supports Apple CarPlay, Android Auto, GPS navigation, Bluetooth, reverse camera, USB media playback, and streaming apps. It connects to your car's existing speakers and electrical system and fits into the factory dashboard cutout.
Will an aftermarket infotainment screen work with my car's steering wheel controls?
In most cases yes, with the right interface module. Most modern cars route audio controls through the steering wheel via a CAN bus or resistor network. We source the correct interface module for your car model and include it in the installation so steering wheel controls continue working after the new screen is fitted. This is one of the most common things done incorrectly in infotainment installations elsewhere.
What size infotainment screen will fit my car?
Screen size compatibility depends on your car's dashboard cutout dimensions and the fascia kit available for your model. Common sizes are 7 inch, 9 inch, 10 inch, and 12.3 inch. We check the correct size for your specific car before recommending a screen. For some car models, only a specific size fits without modification.
Will my reverse camera still work after the new screen is installed?
Yes, if the installation is done correctly. We integrate your existing reverse camera or install a new one as part of the infotainment upgrade. The screen switches automatically to the camera feed when reverse gear is engaged. We calibrate the camera angle and parking grid lines to match your car's geometry.
What is the difference between wired and wireless CarPlay?
Wired CarPlay requires a USB cable connection to your phone every time you use it. Wireless CarPlay connects via Wi-Fi and Bluetooth without a cable. Wireless is more convenient but requires a screen that supports it. Both deliver the same CarPlay functionality. We offer both options depending on the screen model and your preference.
How long does an infotainment installation take?
A standard installation on a popular car model takes 3 to 5 hours. Cars with complex dashboard assemblies or factory integrated features that require additional interface modules take longer. We give you a specific timeline after confirming the screen and your car model.
Will installing an aftermarket screen affect my car's warranty?
Generally no, if the installation is done without cutting or modifying the car's existing wiring. We use plug-and-play harness adapters for most car models that connect directly to the factory wiring without any cutting. This keeps the installation reversible and does not affect the car's warranty. We can advise on your specific car manufacturer's policy if this is a concern.
Can you install an infotainment screen in a luxury car?
Yes. We install infotainment upgrades in BMW, Mercedes-Benz, Audi, and other luxury vehicles. Luxury cars have more complex factory systems including iDrive, COMAND, and MMI that require specific integration approaches. We check the technical requirements for your car's generation and model before recommending a solution.
Do you install infotainment screens for specific car models like Creta, Nexon, or Thar?
Yes. We have installed infotainment systems on Hyundai Creta, Tata Nexon, Mahindra Thar, Maruti Swift, Honda City, Toyota Innova, Kia Seltos, and many other popular models. For high-volume models we have model-specific fitment experience that makes the installation faster and more reliable.
How do I book a car infotainment installation in Pune?
WhatsApp us on 8484092049 with your car model and what you want. We confirm screen compatibility, availability, and give you a quote and timeline. You can also fill the booking form on this page and we will call you back.